MASTER plastering machine
2
1 Description 4
1.1 General description of the equipment 4
1.2 Technical data 6
1.3 Standard equipment 7
2 Safety 8
2.1 Use as planned 8
2.2 Danger signs 8
2.3 Safety at work 8
2.4 Mortar spraying and transporting machines’ safety regulations 9
2.5 Personal protection equipment 9
2.6 Other indications 10
3 Starting 10
3.1 Machine installation 10
3.2 Tuning of the current supply 10
3.3 Tuning of the water supply 10
3.4 Placement and lubrication of the product hose 10
3.5 Air hose connection
and spraying gun adjustment 10
3.6 Checking the turn direction 10
3.7 Air charge on water dose 10
3.8 Water dose adjustment 11
3.9 Auger pump pressure test
(stator or rotor) 12
3.10 Amount of water needed 12
3.11 Dry material load 12
3.12 Starting the machine 12
3.13 Spraying 13
4 Interruptions at work 13
4.1 Short interruptions 13
4.2 Long work interruptions and end of the same 13
4.3 Stopping the machine 14
5 Service and maintenance 15
6 Breakdowns and repairs 16
7 Fittings 20
8 EC Declaration of Conformity 22
To Next Page
Loading...