Rendering Machine V2______________________________________________________________________________________ 2
1 Description 4
1.1 Equipment 4
1.2 Technical data 5
1.3 Standard equipment 6
1.4 Control settings 6
1.5 Handling of the motor 6
1.6 Spray gun 7
2 General Indications 8
2.1 Basic safety indications 8
2.2 Obligations 8
2.3 Guarantee and responsibility 8
2.4 Correct use 9
2.5 Inadequate use 9
3 Security 10
3.1 Safety settings 10
3.2 Safety measures according to indication 11
3.3 Safety measures in the operation 11
3.4 Revision and maintenance 11
3.5 Mechanical changes in the machine 11
3.6 Cleaning of the machine 11
4 Getting started 12
4.1 Preparation for start up 12
4.1.1 Safety indications 12
4.1.2 Placement of the machine 12
4.1.3 Product hose 12
4.1.4 Air hose and spray gun
13
4.1.5 Levels control 13
4.2 Start up 14
4.2.1 General safety indications 14
4.2.2 Safety indications about the operation 14
4.2.3 Starting the motor 15
4.2.4 Prepare the mixture and pump 15
4.2.5 Mortar spraying 16
4.2.6 Connect and disconnect 16
4.2.7 Finishing the work 17
5 Service and maintenance 18
5.1 Blockage in the pump part 18
5.2 Blockage in the mortar hose 18
5.3 Failure in the machine 19
5.4 Working in winter time 19
Supplied by :- Markham (Sheffield) Ltd - Tel:- +44 (0)1909 730861 - www.markham-sheffield.co.uk
To Next Page
Loading...