EasyManua.ls Logo

UTILEV UT30P - Operational Method of Lead Acid Battery Lead Acid Battery

Default Icon
149 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
134134
16. Operational Method of Lead Acid Battery16. Operational Method of Lead Acid Battery
Lead acid battery and its applicationLead acid battery and its application
1. Lead acid battery and its application1. Lead acid battery and its application
Lead acid battery is used for power start engine, and it can be for voltage regulation and overload generator substituteLead acid battery is used for power start engine, and it can be for voltage regulation and overload generator substitute
power, ipower, it has following strengths: t has following strengths: low internal resistance, stable end voltage, low internal resistance, stable end voltage, large support current, low water cost,large support current, low water cost,
huge capacity, nice starting performance at low temperature, light pole corrosion, light mass, low fault rate, convenienthuge capacity, nice starting performance at low temperature, light pole corrosion, light mass, low fault rate, convenient
maintenance. The Maintenancemaintenance. The Maintenance--free batteries are all sealed besides 2 vent holes (for overflowing a little air fromfree batteries are all sealed besides 2 vent holes (for overflowing a little air from
battery) at the side of Maintenancebattery) at the side of Maintenance--free battery. Lowfree battery. Low--maintenance leadmaintenance lead--acid batteries plus liquid left in the batteryacid batteries plus liquid left in the battery
cover mouth.cover mouth.
2. Storage and maintenance2. Storage and maintenance
2.1. Storage2.1. Storage
The place for storing bThe place for storing battery should be clean, drattery should be clean, dryy, airy, and the battery should be charged every , airy, and the battery should be charged every 3 months.3 months.
2.2. Maintenance2.2. Maintenance
● Make sure there is ● Make sure there is no terminal corrosion, link part looseness, no terminal corrosion, link part looseness, outer crack and fastening looseness on outer crack and fastening looseness on the battery.the battery.
If the truck parks over 30 days, in order to keep the battery in normal charging technique condition, you should doIf the truck parks over 30 days, in order to keep the battery in normal charging technique condition, you should do
the following:the following:
2.3. The battery Check and maintenance2.3. The battery Check and maintenance
MaintenanceMaintenance--free battery, Checkfree battery, Check
The indicator of the electric eye will be green when the capacity is normal, density of electrolyte reaches the standard;The indicator of the electric eye will be green when the capacity is normal, density of electrolyte reaches the standard;
it will be white when capacity is not enough, density of electrolyte does not reach the standard; it will be red when theit will be white when capacity is not enough, density of electrolyte does not reach the standard; it will be red when the
electrolyte is acute shortage, the shell should be carefully examined whether there is rupture, leakage or batteryelectrolyte is acute shortage, the shell should be carefully examined whether there is rupture, leakage or battery
failure.failure.
The indicator of battery see particularly the prompt of the battery label.The indicator of battery see particularly the prompt of the battery label.
https://www.forkliftpdfmanuals.com/

Related product manuals