EasyManua.ls Logo

UTILEV UT30P - Page 43

Default Icon
149 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
3737
6. Hydraulic Oil Level6. Hydraulic Oil Level
Check the oil level in the hydraulic oil tank.Check the oil level in the hydraulic oil tank.
The oil level should be between the two marks.The oil level should be between the two marks.
7. Brake Fluid Level Check7. Brake Fluid Level Check
Check the fluid level in the brake fluid reservoir.Check the fluid level in the brake fluid reservoir.
The level should be between the two seams of theThe level should be between the two seams of the
reservoir. When adding fluid, due care should be takenreservoir. When adding fluid, due care should be taken
to prevent air from entering the brake tube.to prevent air from entering the brake tube.
!! CCaauuttiioonn
When adding fluid, due care should beWhen adding fluid, due care should be
taken to prevent dirt or water from enteringtaken to prevent dirt or water from entering
the reservoir.the reservoir.
Brake fluid is dangerous to your health.Brake fluid is dangerous to your health.
YYou should always avoid coou should always avoid contact with skin.ntact with skin.
Replace brake oilReplace brake oil
11
Place forklift truck on level ground, place forksPlace forklift truck on level ground, place forks
on the on the ground, apply park ground, apply park brake, put brake, put transmissiontransmission
gear into neutral position, and cut off engine.gear into neutral position, and cut off engine.
22Remove rubber dustproof cap of oil-drain port,Remove rubber dustproof cap of oil-drain port,
insert tube into oil-drain port and waste oil collectioninsert tube into oil-drain port and waste oil collection
bottle, and loosen oil-drain screw. At the same time,bottle, and loosen oil-drain screw. At the same time,
have another in truck press brake pedal repeatedly.have another in truck press brake pedal repeatedly.
The brake oil should flow from oil-drain port, watch theThe brake oil should flow from oil-drain port, watch the
liquid level of brake fluid reservoir, add new oil until theliquid level of brake fluid reservoir, add new oil until the
oil from oil-drain port is clean, and then screw downoil from oil-drain port is clean, and then screw down
screw of oil-drain port.screw of oil-drain port.
33Have the Have the person in tperson in truck depress ruck depress brake pedalbrake pedal
all the way all the way and hold it and hold it there. At the same tithere. At the same time, haveme, have
the person at the oil-drain port loosen oil-drain portthe person at the oil-drain port loosen oil-drain port
screw, and tell the person on truck to release brakescrew, and tell the person on truck to release brake
pedal when the brake oil flows out and screw down oil-pedal when the brake oil flows out and screw down oil-
drain port screw. Repeat above operation severaldrain port screw. Repeat above operation several
times until there are no bubbles in the brake oil. Watchtimes until there are no bubbles in the brake oil. Watch
the liquid level in brake oil reservoir; add new brake oilthe liquid level in brake oil reservoir; add new brake oil
as the liquid level is falling.as the liquid level is falling.
https://www.forkliftpdfmanuals.com/

Related product manuals