Utilitech Pro SE1036-BP2-02LF0-U

Need help?

Do you have a question about the Utilitech Pro SE1036-BP2-02LF0-U and is the answer not in the manual?

Overview

Function Description
Important Technical Specifications
Usage Features
Maintenance Features

This document describes a LED motion activated floodlight, designed for outdoor use.

Function Description

The floodlight is a motion-activated security light that provides illumination when motion is detected. It features a dusk-to-dawn sensor, which enables the motion detector to activate the light after dark. The security light will not activate during daylight hours regardless of whether it sees motion or not. The device is designed to be mounted on a wall and can be adjusted to direct light where needed. It offers different operating modes including Test Mode, AUTO Motion Sensor Mode, and Manual "ON" Mode, allowing for flexible control over its operation. The motion sensor has adjustable sensitivity and a 180-degree detection range, ensuring comprehensive coverage.

Important Technical Specifications

Model Numbers: SE1036-BP2-02LF0-U, SE1036-WH3-02LF0-U
Electrical Requirements: 120 V, 60 Hz, 0.31A.
Supply Conductors: Minimum 90° supply conductors.
Motion Sensor: 180-degree detection range.
LEDs: LED electronics can be damaged by electrostatic discharge (ESD) shock. Before installation, discharge yourself by touching a grounded bare metal surface to remove this hazard. To avoid damage, do not remove the clear lens over the LED module.
Dimming: DO NOT USE THIS FIXTURE WITH A DIMMING CIRCUIT. If you currently have dimmer controls, you will need to remove them and replace them with regular electrical switches. If you have a three-way dimmer, you will have to replace it with a regular three-way switch. If you are unfamiliar with electrical installations, it is recommended you have a qualified electrician do your installation.

Usage Features

Operating Modes:
- Test Mode: This mode allows you to test the light's functionality and adjust the sensor's position. The lights will come on for 40 seconds regardless of whether it is day or night. The light will come on only if it senses movement. Once movement stops, it will turn off in 5 seconds.
- AUTO Motion Sensor Mode: In this mode, the light will automatically turn on when motion is detected and turn off after a set duration (1, 5, or 10 minutes) if no further motion is detected. The dusk-to-dawn sensor ensures it only activates after dark.
- Manual "ON" Mode: This mode allows the user to manually turn the light ON and OFF. To activate, toggle the wall light switch OFF and ON within 2 seconds. The security light will turn on and stay on for approximately 8 hours, or until the dusk-to-dawn sensor detects light in the morning. Once the dusk-to-dawn sensor detects light, the manual "ON" mode will automatically go back to its original settings of the AUTO motion sensor mode. At any point while in manual "ON" mode, return to the AUTO motion sensor mode by toggling the wall light switch OFF and ON again within 2 seconds.
Adjustable Settings:
- Slide Switch (TIMER): Controls the duration the light stays on after motion detection (1, 5, or 10 minutes).
- Rotary Knob (SENSITIVITY): Adjusts the sensitivity of the motion sensor for up to 60 ft. of distance. Rotating the knob counterclockwise lowers the sensitivity down to as close as 5 ft. It may be necessary to adjust the SENSITIVITY knob several times until you find the proper setting for your particular installation. NOTE: The higher sensitivity level in some distances (up to 60 ft.) increases the likelihood of false triggering. For maximum range performance, allow the fixture to operate in any mode (with power) for at least 48 hours.
Adjustable Heads: The two light heads can be adjusted independently to direct light to specific areas. The sensor arm is also adjustable to optimize motion detection coverage.
Mounting: The device is designed for surface mounting on a wall. It can be installed on either a round surface mount electrical box or a recessed electrical box.

Maintenance Features

Cleaning: Periodically clean the fixture and diffuser using a mild, non-abrasive glass cleaner and soft cloth. DO NOT use solvents or cleaners containing abrasive agents. When cleaning the fixture, make sure you have the power turned off and do not spray liquid cleaner directly onto any part of the fixture or LEDs.
Troubleshooting: The manual provides a comprehensive troubleshooting guide for common issues such as the light not coming on at night, security light cycling ON and OFF continuously, and security light coming on for no apparent reason. Solutions include checking circuit breakers, adjusting the sensor head, repositioning the light, and ensuring proper wiring connections.
Warranty: The manufacturer warrants this lighting fixture to be free from defects in materials and workmanship for a period of 5 years from the date of original purchase by the consumer. The warranty is void if the product is not used in a commercial application where it is on 24 hours per day, but is used in a residential environment for 3 - 5 hours per day. Defective units must be properly packed and returned to the manufacturer with a letter of explanation and your original purchase receipt showing date of purchase. Call 1-866-994-4148 to obtain a return authorization number and an address where to ship your defective product. Note: No C.O.D. shipments will be accepted. The liability of the manufacturer is in any case limited to replacement of the defective light fixture product. The manufacturer will not be liable for any other loss, damage or injury which is caused by the product. The limitation upon the liability of the manufacturer includes any loss, damage, or injury which is (I) to person or property or otherwise; (II) incidental or consequential in nature; (III) based upon theories of warranty, contract, negligence, strict liability, tort, or otherwise; or (IV) directly or indirectly related to the sale, use, or repair of the product. This warranty gives you specific rights, and you may also have other rights which vary from state to state.