What to do if my Utilitech NTH15-18ARD stops, flashes, and the buttons don't work?
If your Utilitech Heater suddenly stops, the display flashes, and the buttons don't respond, it likely overheated. To resolve this, unplug the heater and allow it to cool down for at least 10 minutes before using it again.
How to get rid of bad smell from Utilitech Heater?
If your Utilitech Heater emits a bad smell, it's likely due to dust or debris on the heating element. Place the heater in a well-ventilated area and keep it running until the smell disappears.
What to do if Utilitech NTH15-18ARD stops, flashes, buttons don't work and alarm rings?
If your Utilitech Heater suddenly stops, flashes, the buttons don't work, and an alarm rings 10 times, this indicates a short-circuit in the temperature sensor. Do not attempt to repair the heater yourself; consult a qualified electrician for assistance.
General| Type | Space Heater |
|---|---|
| Heater Type | Ceramic |
| Power | 1500W |
| Wattage | 1500W |
| Voltage | 120V |
| Heating Area | Up to 150 sq. ft. |
| Thermostat | Yes |
| Adjustable Thermostat | Yes |
| Overheat Protection | Yes |
| Fan Assisted | Yes |
| Oscillation | Yes |
| Remote Control | No |
| Timer | No |
| Safety Features | Tip-over switch |
| Weight | 4.85 lbs |
To Next Page
