Utilitech NTH15-18ARD User Manual

9
Oscillation function
1. To switch on the oscillation function, press the
oscillation button (H). The oscillation indicator
lights up.
2. To switch off the oscillation function, press the
oscillation button (H) again. The oscillation
indicator goes off.
Temperature indicator automatic switch off
The product features the temperature indicator
automatic switch off function. If no button is pressed
for 60 seconds, the temperature indicator goes off.
1. To switch off the function, press and hold the timer
(I) and decrease buttons (D) for two seconds. The
product beeps once. The temperature indicator is
constantly on.
2. To switch the function back on, press and hold the
timer (I) and decrease buttons (D) for two seconds
again. The product beeps once.
Tip-over protection
1. If the product tips-over, it enters the tip-over
protection mode. The product beeps and the display
(B) flashed .
2. Place the product on its stand to deactivate the
tip-over protection mode.
NOTICE: This function can only be achieved through
the control panel.

Utilitech NTH15-18ARD Specifications

General

Brand	Utilitech
Model	NTH15-18ARD
Category	Heater
Language	English