Utilitech UT1042S - User Manual

Questions and Answers

A
annalopezAug 4, 2025
Why won't my Utilitech UT1042S fixture come on?
- A
  Anna YoungAug 4, 2025
  If your Utilitech Lighting Equipment fixture isn't turning on, several factors could be at play. First, ensure the circuit and wall switch are both active and that the fixture is receiving power. Check the power cord and link cord connections to confirm they are securely connected to both the outlet and the control unit. Also, make sure to activate the light by moving your hand within the sensing range of the control unit. Finally, ensure your hand is close enough to the control unit when attempting to activate the light.
T
Thomas PerezAug 15, 2025
What to do if my Utilitech Lighting Equipment fixture is dimming automatically?
- K
  Katherine FisherAug 15, 2025
  If your Utilitech Lighting Equipment fixture is dimming automatically, it might be due to an object being too close to the control unit. Ensure there are no objects within 9.8 inches of the control unit. Relocating the control unit or removing any nearby items should resolve this issue.
D
Danny DanielsAug 25, 2025
How to fix Utilitech UT1042S fixture that won't dim?
- C
  changrobertAug 25, 2025
  If your Utilitech Lighting Equipment fixture isn't dimming, there are a couple of things to check. Ensure that you hold your hand stationary under the sensor within 3.9 inches. Also, dust accumulation on the sensor of the control unit can prevent dimming. Clean the sensor surface periodically using a mild, non-abrasive cleaner.