UTRAI JS-5 - Operation Guide; Charging Your Jump Starter

Operation Guide
Charging Your Jump Starter
• At Home :
1. Plug the USB cable into computer or any USB wall adaptor(not included).
2. Connect the USB-C port into the Jump Starter.
• In Car :
1. Plug the car adaptor (not included) into the socket.
2. Connect the USB-C port into the Jump Starter.
NOTE: It is recommended to recharge the Jump Starter every 3-4 months to
maintain the efficiency and prolong the service life of the internal battery even if the
unit has not been used.
PSI
USB
BARKPA
kg/cm
2
IN
DC
OUT
OUT
PSI
USB
BAR KPA
kg/cm
2
IN
DC
OUT
OUT
EN05