EasyManua.ls Logo

UTStarcom cdm7126 - Making an Emergency Call

UTStarcom cdm7126
72 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
56
57
SETTINGS SETTINGS
4.
Press to highlight volume section. Then press the Navigation
Key left or right
to adjust the volume level.
5.
Press the Left Soft Key [Save] to save the setting.
ALERTS
Minute Beep
Sounds an alert every minute during a call.
1.
Press the OK Key [Menu], then press for the “Settings”
menu.
2.
Press “Sounds”, Alerts, then “Minute Beep”.
3.
Select “On” or “Off”, then press the Left Soft Key [Select] to
save the setting.
Roaming
Sounds an alert when leaving a service area and entering a roaming
service area.
1.
Press the OK Key [Menu], then press for the “Settings”
menu.
2.
Press “Sounds”, Alerts, then “Roaming”.
3.
Select “On” or “Off”, then press the Left Soft Key [Select] to
save the setting.
Connect
Notifies you that a call has been successfully placed.
1.
Press the OK Key [Menu], then press for the “Settings”
menu. Press
“Sounds,” Alerts,”, then “Connect”.
2.
Select “On” or “Off”, then press the Left Soft Key [Select] to
save the setting.
Fade
1.
Press the OK Key [Menu], then press for the “Settings”
menu. Press
“Sounds,” Alerts,”, then “Fade”.
2.
Select “On” or “Off”, then press the Left Soft Key [Select] to
save the setting.
TONE LENGTH
1.
Press the OK Key [Menu], then press for the “Settings”
menu. Press
“Sounds, then ”Tone Length”.
2.
Select “Normal” or “Long”, then press the Left Soft Key
[Select] to save the setting.
• Use Ringer:
• Separate
- Level 0~5
- Press the OK Key
to Always Vibrate.

Table of Contents

Other manuals for UTStarcom cdm7126

Related product manuals