READ INSTALLATION CAUTIONS AND VERIFY
MINIMUM WATER QUALITY REQUIREMENTS BEFORE
PROCEEDING WITH INSTALLATION
Installation Example - Model 8.40C
Disinfected water to all
taps and appliances
Select a disinfection system mounting location where a potential leak will not
cause water damage. UVDynamics is not responsible for water damage. When the
disinfection system can only be located where water damage is a possibility, the
installation of an automatic leak detector / shut off device is highly recommended
OPTIONAL – additional
pre-treatment as required,
5 micron sediment filter –
minimum required pre-treatment
© COPYRIGHT 2019 UVDynamics – a Castle Circuits Inc. Business Group All RIGHTS RESERVED
To Next Page
Loading...