EasyManuals Logo

Uwatec G2 User Manual

Uwatec G2
4 pages
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #4 background imageLoading...
Page #4 background image
PAIRING YOUR TRANSMITTER
METHOD 1 AUTOMATIC
Mount 1ST stage with transmitter attached on a full tank.
Turn on your G2, make sure it is displaying the Time-of-Day screen,
then place it near the transmitter (as shown on right)
and open the tank valve.
METHOD 2 MANUAL
Mount 1ST stage with transmitter attached on a full tank.
Turn on your G2.
From the Time-of-Day display, press left button
to get to Main Menu.
Scroll to Other Settings.
Press right button to ENTER.
From Other Settings menu, scroll down Gas Integration.
Press right button to ENTER.
From Gas Integration menu, scroll to Pairing.
Press the right button to ENTER.
Open the tank valve, and you are ready to pair.
Using either method, once pressurized the transmitter will send a
pairing sequence to your G2.
When it receives this information, the display will show a list of tank
designations.
Scroll to Tank T1. (Tank T1 is always the main tank you start your dive with.)
Press right button to SAVE your selection.
Your G2 will conrm pairing with message: PAIRING TO T1 SUCCESSFUL.
At that point, tank pressure will appear on your G2 display,
and you’re ready.
G2 Quick Use Card
HOW TO POSITION AND USE THE HEART RATE MONITOR
Position your HR belt (as shown on right).
Adjust the strap so that it is comfortable to wear but snug enough so that it stays in place.
HR belt must be worn directly against the skin.
Moisten the electrode areas if your skin is dry or when diving in a drysuit.
The maximum operating depth for the HR belt is 197ft/60m.
TO ACTIVATE THE HEART RATE FUNCTION ON YOUR G2
Time-of-Day screen to Main Menu – press Enter.
Main Menu to Personalization – press Enter.
Scroll to Workload (WL) – press Enter.
Select Heart Rate - press right arrow to Save.
Advance to Max Heart Rate – set MHR - press right arrow to Save.
Advance to Base Heart Rate – set BHR - press right arrow to Save.
Advance to Skin Temp – set to On - press right arrow to Save.
Heart Rate & Skin Temperature functions are now activated.
For more information and to view this card in other languages, visit http://www.scubapro.com
P/N 06.205.407

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Uwatec G2 and is the answer not in the manual?

Uwatec G2 Specifications

General IconGeneral
BrandUwatec
ModelG2
CategoryDiving Instrument
LanguageEnglish

Related product manuals