Uwatec S600 Configuration A - User Manual

2003 SCUBAPRO
Important note
: The following information is not designed to be a complete training guide for servicing the listed SCUBAPRO regulators. All SCUBAPRO
technicians are required to attend an annual service training program to insure safe handling and servicing of SCUBAPRO products. All SCUBAPRO technicians
must be employed by an authorized SCUBAPRO facility.
SCUBAPRO
Repair Guide
S600-S550
Second Stages
S600 Configuration A S600 Configuration B
USE THIS GUIDE AS A REFERENCE WHEN SERVICING THE S600 AND
S550 SECOND STAGES
S550

Uwatec S600 Configuration A Specifications

General

Display Type	LCD
Water Resistance	100 meters
Operating Modes	Air, Nitrox, Gauge
Battery Type	CR2450
Ascent Rate Indicator	Yes
Audible Alarm	Yes
Type	Dive Computer
Air Integration	No
Backlight	Yes
Nitrox Compatibility	Yes

Summary

SCUBAPRO S600-S550 Repair Tools and Icons

Tools Required for Service

Lists all necessary tools for repairing the SCUBAPRO S600-S550 second stages.

Service Icon Legend

Explains the meaning of symbols used throughout the repair guide for clarity.

SCUBAPRO S600-S550 Disassembly Procedures

Removing Housing Pin and Cover

Guide on removing the housing pin and the two-piece second stage cover using specific tools.

SCUBAPRO S600-S550 Component Servicing

Adjustable Orifice and VIVA Flow Vane Service

Instructions for removing and servicing the adjustable orifice and VIVA flow vane.

SCUBAPRO S600-S550 Reassembly Steps

O-ring Lubrication and Balance Chamber Assembly

Details on lubricating o-rings and assembling the two-piece balance chamber for reassembly.

SCUBAPRO S600-S550 Adjustments and Final Checks

Performing Adjustments and Cracking Effort Test

Guide to making initial air-on adjustments and testing the regulator's cracking effort.