18
7.9 SHIFT BETWEEN DIFFERENT WEIGHT UNITS
Press MODE to shift different weight units.
NOTE: The pound unit may be not available in
certain countries.
7.10 SWITCHING BACKLIGHT ON/OFF
Method 1: During operating process, the
backlight can be switched ON/OFF by
pressing the MODE key to shift to the desired
status.
Method 2: When unloaded (weight=0), press
and hold the ON/ZERO key for about 2
seconds to set backlight ON/OFF.
7.11 RECHARGING THE SCALE
7.11.1 When low battery signal appears,
insert a charged external power pack or
apply the AC adaptor to recharge the battery.
Failure in doing so may cause irrecoverable
damage to the rechargeable battery.
7.11.2 Low battery signal is represented
by either case of the follows depends on
operating status.
7.11.2.1 Low battery is detected when power
on
To Next Page
Loading...