15
OPERATING INSTRUCTIONS
7.1 PLACING THE SCALE
Hang this scale with a strong enough media where
is free from RF interference, vibration, fire,
direct sunlight and excessive moisture.
For safety reasons and best weighing result,
always hang this scale and lift a load
vertically.
7.2 POWER ON/OFF THE SCALE
Press ON to turn scale on.
Press OFF to turn scale off.
7.3 ZERO FUNCTION
If ZERO INDICATOR does not appear when scale
is unloaded, press ZERO to reset weight
displayed to zero. Refer to general
specification table for maximum zero range.
7.4 TARE FUNCTION
7.4.1 To Tare Off the Weight of a Container
Apply a container to hook, then press TARE
to tare off the weight of it. After the TARE
is pressed, the TARE INDICATOR appears.
To Next Page
Loading...