21
RATED CAPACITY CANNOT BE ATTAINED
CHECK: Is TARE function being utilized?
ACTION: Remove all loads from hook, press
TARE and try again.
SCALE DISPLAYS
00000
CHECK: Is the scale overloaded?
ACTION: Remove all loads from hook
immediately and check again.
SCALE DOES NOT WEIGH CORRECTLY
CHECK: Is the correct weight unit being
utilized?
ACTION: Select the correct weight unit.
CHECK: Is min. weight applied to scale?
ACTION: Refer to General Specifications
for recommended min. load
applied and try again.
CHECK: Is the load lifted vertically?
ACTION: Remove all loads and retry.
To Next Page
Loading...