5
included. An external battery pack is
available as option.
b. Check and make sure that the voltage of the
AC adaptor supplied matches with the voltage
of the main output.
c. Insert the output plug of AC adaptor firmly
into the DC input jack of scale. The DC input
jack is located underneath the back of the
scale.
d. Before first time use, charge the built-in
rechargeable battery for at least 8 hours
or until the charging indicator turns green.
e. For safety reasons, do not share the same
mains outlet with other apparatus.
2.4 OPTIMAL INSTALLATION REQUIREMENTS
For optimal results, it is recommended that
this product should be installed in a location
free from corrosive gas, dust, and electronic
interference.
To Next Page
Loading...