PAIRING AND CONNECTING WITH A BLUETOOTH DEVICE
When pairing with one, two or more Bluetooth devices, perform the following pairing procedure
every time you pair a new device.
1. Press the button to turn on the Remix speaker.
Power on tone plays, battery level orange LED flashes, then
white LED flashes twice every second while the VAMP
orange LED is on
2. Press the button to connect the new Bluetooth device.
Once “V-MODA Remix” appears in the “new/available
Bluetooth devices” section on your phone, select it to begin
pairing. If passkey input is required on the display of a
Bluetooth device, type “0000”
3. Ready to rock. When the Bluetooth connection is established,
connected tone plays and white LED on the Remix speaker
stays lit
Bluetooth Bluetooth
V-MODA
Remix
To Next Page
Loading...