What to do if V-Moda REMIX are not charging?
If your V-Moda Remix speaker isn't charging, verify that the charging cable and power source work correctly. Ensure both USB plugs are firmly connected. Try disconnecting and reconnecting the USB charging cable. If charging via computer, ensure the USB port is powered and the computer is plugged in.
Why is my V-Moda Speakers receiving no audio or low quality audio?
If you're experiencing no audio or low audio quality from your V-Moda Remix speakers, consider the following: * Check the battery. * Verify the pairing. * Ensure the audio source is playing and the volume isn't muted or turned down. * Reboot the source device. * Turn the Remix speaker off and on again, and reset its paired devices history. * Try streaming from another device or select another track. * Move the device and Remix speaker closer (max 33 feet or 10m). * Keep away from interference (wireless routers, Bluetooth devices, microwaves, etc.). * Close unused applications and disable Wi-Fi on your device.
Why is my V-Moda Speakers sound distorted?
To address distorted sound on your V-Moda speakers, first, check if the issue is with the audio device or the file you're playing. Then, ensure the EQ settings on your device are properly configured.
What to do if V-Moda REMIX have no audio in wired mode?
If you're getting no audio from your V-Moda Remix speakers in wired mode, make sure the audio device and the Remix speaker jacks are free of any obstructions. Also, check that the cable is securely connected.
How to fix uneven sound on V-Moda REMIX (in wired mode)?
To fix uneven sound in wired mode on your V-Moda Remix speaker, ensure the cable is firmly connected by fully inserting the 3.5mm male connector into the 3.5mm female jack.
Why is there a lack of or excessive bass or treble on my V-Moda REMIX (in wired mode)?
If you experience a lack of or excessive bass or treble in wired mode with your V-Moda Remix speaker, disable any audio enhancement features on your audio device. Ensure the cable is firmly connected to both the Remix speaker and your device. If the problem persists, try using a different cable.
What to do if V-Moda Headphone sound is distorted?
If you are experiencing distorted sound with your V-Moda Headphone, first check that the issue isn't with the audio device itself or the file you're playing. Then, ensure the EQ settings on your device are correctly configured. Finally, make sure you're using the correct fitting and that it fits snugly, similar to an earplug, with the driver pointed directly towards your ear canal.
How to fix V-Moda Headphone with no audio?
If you're not getting any sound from your V-Moda Headphone, make sure the headphone jack on your audio device is clean and free of any obstructions. Also, check that the headphone plug is securely connected.
Why V-Moda Headphone has lack of bass?
If your V-Moda Headphone sounds like it's lacking bass or has too much treble, try turning off any audio enhancement features on your audio device. Also, make sure you are using the proper fitting.
What to do if one V-Moda Headphone earphone is quieter?
If one earphone of your V-Moda Headphone is quieter than the other, it's possible that debris is inside the housing, blocking the sound driver. To resolve this, remove the silicone fitting and blow briskly into the earpiece.
General| Type | Portable Bluetooth Speaker |
|---|---|
| Frequency Response | 20 Hz - 20 kHz |
| Battery Life | Up to 10 hours |
| Bluetooth Range | 33 feet (10 meters) |
| Dimensions | 205 x 65 x 68 mm |
| Connectivity | Bluetooth, 3.5mm Aux Input |
| Weight | 710g |
| USB | USB-C for charging |
| Microphone | Built-in microphone |
| Output Power | 10W |
Advice on enjoying music responsibly to prevent hearing loss.
How to turn on the speaker and interpret battery level via LED flashes.
Procedure for turning off the Remix speaker.
Diagram identifying controls like ON/OFF, Volume, and Pairing on the top.
Details on VAMP port, AUX-IN, and USB Type-C port on the back.
Steps to initiate pairing and connect to a new Bluetooth device.
How to quickly reconnect the speaker to an already paired Bluetooth device.
Playing music, track skipping, and volume adjustment via speaker buttons.
How to answer, refuse, or hang up calls using the speaker's multifunction button.
Managing calls, including putting a call on hold and switching to a second call.
Solutions for receiving no or low-quality audio from streaming sources.
To Next Page