V-TAC VT-6053-5 - User Manual

SAFETY INSTRUCTIONS
• Make sure that the mains voltage matches the voltage stated on the rating label of the
appliance.
• Check the power cord regularly for visible damage. If the cord is damaged, it must be
replaced by the official Technical Support Service, in order to avoid any type of danger.
WARNING: Do not use the appliance if its cord, plug, or housing is damaged, nor after it
malfunctions or has been dropped or damaged in any way.
• The appliance is not intended to be used by children under the age of 8. It can be used by
children over the age of 8, as long as they are given continuous supervision.
• This appliance is not intended to be used by persons with reduced physical, sensory, or
mental capabilities, or lack of experience or knowledge, unless they have been given supervi-
sion or instruction concerning the use of the appliance in a safe way by a person responsible
for their safety, and understand the hazards involved.
• Supervise young children to make sure that they do not play with the appliance. Close
supervision is necessary when the appliance is being used by or near children.
• Keep the appliance and its cord out of reach of children under the age of 8.
• Do not try to repair the appliance by yourself. Contact the official Technical Support Service
for advice.
• Cleaning and maintenance must be carried out according to this instruction manual to make
sure the appliance functions properly. Turn off and unplug the appliance before cleaning it.
• Make sure the fan is not placed near drapes, curtains, or any objects that may be drawn into
the fan.
• The minimum distance between the fan blades and the floor must be 2.3 m. The minimum
carrying capacity of the outlet box from which the fan is hung must be 45 kg.

Summary

Product Assembly

Installation of the Mounting Bracket

Secure the hanger bracket to a firm flat surface capable of withstanding fan weight.

Installation of the Down Rod and Hanger Ball

Assemble the down rod and hanger ball, ensuring electrical leads pass through and securely fix the clevis pin.

Hanging the Fan to the Mounting Bracket and Attaching the Blades

Lift fan to bracket, align hanger ball with slot, and ensure blades are securely attached to prevent rotation.

Remote Control and Wiring Instruction

Place receiver through hanging bracket, connect wires by color codes, and connect fan to remote.

Blade Assembly

Insert blades into motor housing slots, align with holes, and secure with screws, avoiding overtightening.

Installing the LED Light and Glass Shade

Align lamp holder, connect wires, mount bulb, and carefully install glass shade, turning clockwise to lock.

Operation

Remote Control Functions

Use the remote to control fan on/off, speed (High, Medium, Low), and set timers for auto turn-off.

Replacing Remote Control Batteries

Slide battery cover to open, replace with 1 x A23 12V battery, and reassemble cover.

Cleaning and Maintenance

Troubleshooting Common Issues

Fan Does Not Start Up

Check fuses, circuit breakers, and all wire connections after turning off power.

Fan Emits Noises

Allow break-in time, ensure all screws are tight, check light kit, mounting bracket, and wire nuts.

Fan Does Not Produce Much Air

Verify fan is not running in reverse and that the room size is appropriate for the fan.

Fan Wobbling

Ensure mounting bracket is tight and all blade and motor screws are secure.

V-TAC VT-6053-5 Specifications

General

Model	VT-6053-5
Voltage	220-240V
Frequency	50Hz
Remote Control	Yes
Material	Metal + Wood
Speed Settings	3
Size	52 inches
Blade Size	52 inches
Category	Fan
Type	Ceiling Fan