V2 BY Series User Manual

ENGLISH
53
DISPLAY DATA DESCRIPTION DEFAULT
MEMO
DATA
StoP STOP input no
no - input is disabled: the STOP command is not activated
invE - The STOP command stops the barrier: the successive START reverts the motion direction
ProS
- The STOP command stops the barrier: the successive START does not revert the
motion direction
Foto Photocell input no
no - disabled input
APCh - Always enabled input
CFCh - Enabled input in closing and with closed barrier
Ch - Enabled input only in closing
Ft.tE no / Si Photocell test no
CoS Obstacle detection input no
no - Disabled input
Ch - Input enabled during closing
Co.tE Functional test of the obstacle detection sensors no
no - Test disabled
Foto - Test enabled by optical sensors.
rESi - Test enabled for resistant rubber sensors
FinE End programming no
no - Does not leave the programming menu
Si - Leaves the programming menu storing the set parameters
CITY10+ FUNCTION TABLE

V2 BY Series Specifications

General

Brand	V2
Model	BY Series
Category	Automatic Barriers
Language	English