Need help?Do you have a question about the V2 NIUBA-24V and is the answer not in the manual?
General| Brand | V2 |
|---|---|
| Model | NIUBA-24V |
| Category | Automatic Barriers |
| Language | English |
Checks before installation and identification of the automation type for proper use.
Contact information and hours for customer service assistance.
Declaration of conformity with EU directives for the machinery.
Procedure for adjusting the spring coupling hole on the rocker arm.
Steps to change the spring position for left-side installation.
Detailed steps for cutting and fitting a square boom with accessories.
Steps for cutting and fitting a round boom onto the barrier.
Requirements for connecting the control unit to the power supply.
Instructions for connecting an optional battery pack for power outages.
Information on powering the barrier using the ECO-LOGIC solar system.
Details on the two activation inputs and their functions based on programmed modes.
Instructions for installing and connecting a safety stop push-button.
How to activate and connect photocells for safety during closing or opening.
Installation and connection of safety ribbons for detecting obstacles.
How to connect and program a courtesy or utility light.
Connecting low voltage warning or flashing lights.
Suggestion to use an external aerial for maximum radio range.
Connecting and regulating the power for an optional holding magnet.
Functionality of the lock-out input related to the inspection access flap.
How the control unit uses the encoder for barrier movement and obstacle detection.
Information on connecting the MR receiver module and its channels.
Connecting and configuring optional V2 modules via the ADI interface.
Description of the control unit display segments and their meanings.
How to navigate the programming menu using the control panel keys.
How the control unit signals when maintenance service is required based on cycle count.
To Next Page
