EasyManua.ls Logo

Vacmaster PE401 - Troubleshooting; Common Problems and Solutions

Vacmaster PE401
12 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
11
TROUBLESHOOTING
Problem Remedy
No Flow/Restricted Flow
Odor ( Electrical )
Leaking
Unit Does Not Turn On
1) Check strainer for clog.
2) Make sure water is in vac tank.
3) Check shut-off valve.
4) Check for kink in hose.
5) Make sure hose outlet does not exceed 50 feet.
1) Check GFCI-see page 8.
2) Make sure Pump Accessory is plugged in.
3) Make sure switch is on.
4) Check house circuit breaker/fuse.
1) Check fi t on adapter.
2) Check coupler fi t and “O” ring.
3) Check shut-off valve fi t and “O” ring.
4) Check garden hose fi t and make sure hose washer
is in place.
1) Unplug Pump Accessory.
2) Check for blockage.
3) If Pump Accessory continues to have an electrical
odor, return to Service Center.