-22-
No solution
spraying out.
Clean water tank is empty. Fill the clean water tank.
Clean water tank is not installed
correctly.
Check the clean water tank for correct
installation. Ensure it is installed in
place.
Hose nozzle will
not spray after
lling the clean
water tank.
Air is trapped in the pump and
hose.
Turn on the spot cleaner. If hose does
not spray, prime the pump by lowering
the hose down to the oor and hold the
trigger for up to 1 minute.
Motor noise
becomes high-
pitched.
Dirty water tank is full. Empty the dirty water tank.
The suction hose is clogged. Clean the hose.
The oat in the dirty water tank
has been activated.
Empty and clean the dirty water tank.
To Next Page
Loading...