-21-
TROUBLESHOOTING
Should you have any problem(s) with your vacuum cleaner, review the table
below for solutions to minor performance issues.
The spot
cleaner is not
operational.
Unplugged at power outlet. Plug in rmly to suitable power outlet.
Defective power outlet.
Check with a good appliance. Be sure
the power cord plug is fully plugged
into an electrical outlet.
The motor is damaged.
Have the damaged part checked by
qualied personnel or contact the after
sales helpline 1-866-384-8432.
Poor pick-up
performance.
Dirty water tank is not installed
correctly.
Check the dirty water tank for correct
installation. Ensure it is installed in
Dirty water tank is full. Empty the dirty water tank.
The suction hose is clogged. Clean the hose.
Float valve is activated. Empty the dirty water tank.
Water escapes
from the spot
cleaner.
Dirty water tank is full. Empty the dirty water tank.
Dirty water tank is not installed
correctly.
Check the dirty water tank for correct
installation. Ensure it is installed in
place.
Clean water tank is not installed
correctly.
Check the clean water tank for correct
installation. Ensure it is installed in
place.
WARNING
Disconnect electrical supply before performing maintenance to the spot cleaner.
Failure to do so could result in electrical shock or personal injury.
To Next Page
Loading...