How to Use
Tips & Suggestions for Program Settings
• The vacuum time can be adjusted to your desired length.
• Suggested vacuum time should be set to
• 18-20 for liquids/powders.
• 35-40 is a good starting point for other products.
All settings are for 3 mil bags. The seal time and cool down time should
only be changed if you move up in thickness of bags. For different
thickness bags, increase both seal and cool down times by .2 seconds
at a time until you get a good seal.
13
VP330 Chamber Vacuum Sealer | User Guide
ARY, Inc. | 11880 College Blvd Suite 550 Overland Park, KS 66210 | www.VacMasterFresh.com | 800-821-7849
Please scan the QR code for an instructional video on the
programmable functions.
To Next Page
Loading...
