Vacmaster VP680 - Adding Oil to Vacuum Pump; Cabinet Housing Oil Check Points

3
ARY, Inc. | 11880 College Blvd Suite 550 Overland Park, KS 66210 | www.VacMasterFresh.com | 800-821-7849
VP680 Chamber Vacuum Sealer | User Guide
Read and complete the following to prevent any damage.
Oil must be added to the vacuum pump before using.
VacMaster
®
model VP680 uses an oil vacuum pump.
For shipping purposes there is no oil in the pump. Oil must be added.
Adding Oil to Vacuum Pump
Turn off and unplug machine to prevent electrocution.
1. 
enclosed plastic oil bottle.
2. Locate the oil ll bolt (A) on the top of the vacuum pump.
3. 
4. Watching oil site glass (B) insert end of oil bottle into hole.
5. Fill oil level between 1/2 to 3/4 of site glass.
•
6. Replace and tighten bolt to vacuum pump.
YOU MUST ADD OIL
BEFORE USE!
FAILURE TO DO SO WILL DAMAGE THE PUMP!
A. Oil Fill Bolt
Side of Cabinet
Housing
B. Oil Site Glass