How to fix a Vacmaster Vacuum Cleaner power tool take-off socket that is not working?
If the power tool take-off socket on your Vacmaster Vacuum Cleaner isn't working, it could be because: * The power tool wattage is not compatible with the power take-off socket. Check the wattage to ensure compatibility. * The incorrect operating mode is selected. Make sure the switch is in position II.
Why does my Vacmaster Vacuum Cleaner have low suction power and make loud noises?
Low suction power and high operating noise or vibrations in your Vacmaster Vacuum Cleaner can occur for several reasons: * The dust bag might be full, in which case you should replace it. * There might be a blockage in the suction nozzle, hose, or tank inlet, so check and clear any obstructions. * The cartridge filter could be blocked; remove and clean it. * The float valve may have closed. Empty any liquid waste from the container and ensure the float valve, located underneath the filter, can move freely.
What to do if my Vacmaster Vacuum Cleaner won't turn on?
If your Vacmaster Vacuum Cleaner isn't working, the issue could be due to: * No power: Check the power supply and fuse. * A functional fault in the power cord, switch, or motor: Have the damaged part checked by qualified personnel or contact the after sales helpline.
Why is dust escaping from the motor cover of my Vacmaster Vacuum Cleaner?
Dust escaping from the motor cover of your Vacmaster Vacuum Cleaner can be due to: * A missing or damaged cartridge filter. Put in a cartridge filter or replace it. * Misuse of the cartridge filter when wet vacuuming, causing damage. Replace the damaged cartridge filter with a new one when dry vacuuming. * Misuse of the foam filter when dry vacuuming. Replace the foam filter with the cartridge filter.
Why does my Vacmaster Vacuum Cleaner have low suction power?
Low suction power in your Vacmaster Vacuum Cleaner, accompanied by high motor speed or vibrations, can be due to a full dust bag. Replace the dust bag to resolve this. Another possible cause is a blockage in the suction nozzle, hose, or tank inlet. Inspect these parts and remove any obstructions.
How to fix dust escaping from the motor cover of my Vacmaster VQ1530SFDC?
If dust is escaping from the motor cover of your Vacmaster Vacuum Cleaner, the dust bag may be missing or damaged. Install a dust bag, or replace the existing one.
General| Model | VQ1530SFDC |
|---|---|
| Type | Wet/Dry Vacuum |
| Tank Capacity | 15 Gallons |
| Power Source | Electric |
| Voltage | 120V |
| Hose Length | 7 Feet |
| Cord Length | 20 ft. |
| Amps | 12 Amps |
| Included Accessories | crevice tool, foam filter |
Read and understand all instructions before using this vacuum cleaner.
To Next Page
