WINDOW SLIDER KIT INSTALLATION
1: Parts name:
A) Panel (Second slider may not supplied)
B) Panel with one hole
C) Panel without hole (may not supplied)
D) Screw to lock window kit In place
2: Assembly:
Slide Panel B and C Into Panel A and size to widow width. Windows sizes vary. When sizing
the window width, be sure that the window kit assembly is free from gaps from gaps and/or
air pockets when taking measurements.
3. Lock the screw into the holes that correspond
With the width that your window requires to ensure that there are no gaps or air pockets in
the window kit assembly after installation.
To Next Page
Loading...
