Need help?Do you have a question about the Vaderstad NZ Aggressive NZA 600 Series and is the answer not in the manual?
General| Working Width | 6 m |
|---|---|
| Weight | 3200 kg |
| Drawbar Load | 1500 kg |
| Number of Rows | 5 |
| Required Tractor Power | 180-250 hp |
Initial checks and understanding before operating the cultivator.
Identifies and explains crucial safety decals found on the machine.
Covers general safety practices and user responsibilities.
Details about identification plates, including serial numbers and CE marking.
Safe procedures for moving the machine when it is not attached to a tractor.
Safe methods for lifting and unloading the agricultural implement.
Step-by-step guide for fitting the tines onto the harrow.
Instructions on how to attach the drawbar to the central section.
Steps to correctly attach the following harrow section.
Guidance for installing optional sections like Crossboards or track eradicators.
Process for connecting the cultivator to the tractor.
Procedures for changing the implement's operational mode.
Fine-tuning the reverse-action valve for optimal performance.
Configuring depth control systems for NZA 600-1000 models.
Adjusting the working depth and calibrating the scale.
Instructions for adjusting the front and rear Crossboards.
Adjusting the working depth and angle of the following harrow.
Safety measures for securing the implement before maintenance.
Checking and adjusting play in the wheel bearings.
Instructions on how to replace seals within hydraulic rams.
Diagnosing and resolving issues with the depth control system.
Procedures for removing air from depth control and Crossboard hydraulics.
Identification of all points requiring lubrication on the machine.
Visual representations of the implement's hydraulic circuits.
Key specifications and technical details for all models.
To Next Page
