Vaetrix ETG Series User Manual
• Safety
We use the International Electrical Symbols on our products
and in the manuals to alert users of key criteria that must be
followed when operating the product
.
• Use a #2 phillips screwdriver when tightening the battery
door screws to prevent stripping and provide adequate
sealing.
• Use backup wrench on pressure sensor to install or
remove fitting.
• Gauge is not approved for use in hazardous locations.
• To clean the gauge, wipe down with damp cloth and small
amount of dish soap. Do not submerge the unit in water
at anytime.
2/19/2019 4
Symbol Description
Power Off / Power On
Earth Ground
Warning, Risk of Danger or Damage
European Conformity
Hazardous Voltage
Battery Symbol
Wheelie Bin, Conforms to EC Directive
for Disposal
To Next Page
Loading...