EasyManua.ls Logo

Vaillant ecoFIT pure 435 User Manual

Vaillant ecoFIT pure 435
56 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
en Installation and maintenance instructions
ecoFIT pure
412 - 435
0020230535_07 - 29.07.2020

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Vaillant ecoFIT pure 435 and is the answer not in the manual?

Vaillant ecoFIT pure 435 Specifications

General IconGeneral
MountingWall-mounted
ERP efficiencyA
CH output35 kW
DHW output35 kW
Output35 kW
Efficiency94%
Dimensions (H x W x D)700 x 400 x 300 mm
FuelNatural gas
Warranty2 years
Boiler typeCombination boiler

Summary

Safety and Compliance

Intended Use, Qualification, and General Safety

Defines intended use, required qualifications, and general safety precautions for handling the product.

Regulatory and Standards Compliance

Outlines the need to observe national regulations, directives, laws, ordinances, and standards.

Product Information and Setup

Technical Data and Specifications

Provides comprehensive technical data for various models, including electrical and heating parameters.

Product Description and Features

Details product designation, CE marking, functional elements, safety devices, and data plate information.

Installation Site and Air/Flue Pipe Setup

Guides on selecting the installation site, minimum clearances, and air/flue pipe installation.

Installation and Commissioning

Installation Procedures and Connections

Covers preparation steps, gas, condensate, water, and electrical connections.

Initial Start-up and System Checks

Outlines initial start-up, water quality, gas settings, and combustion analysis.

Commissioning Flow Chart and Checklist

Provides a flowchart and checklist for verifying correct installation and operation.

Operation, Maintenance, and Troubleshooting

Operating Modes and Installer Settings

Explains operating concepts, installer level access, status codes, and check programmes.

Inspection, Maintenance, and Component Checks

Details tasks for inspection, maintenance, cleaning of components, and record completion.

Fault Finding, Repair Procedures, and Disposal

Guides on identifying faults, rectifying them, and decommissioning/disposing of the product.

Related product manuals