EasyManua.ls Logo

Vaillant ecoFIT pure 430 User Manual

Vaillant ecoFIT pure 430
56 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
en Installation and maintenance instructions
ecoFIT pure
412 - 435
0020230535_07 - 29.07.2020

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Vaillant ecoFIT pure 430 and is the answer not in the manual?

Vaillant ecoFIT pure 430 Specifications

General IconGeneral
BrandVaillant
ModelecoFIT pure 430
CategoryBoiler
LanguageEnglish

Summary

Safety

General Safety Information

Crucial safety advice covering gas, flue gas, electricity, and more to prevent risks.

General Safety Information (Continued)

Gas Safety Precautions

Actions to take if gas is smelled, including avoiding ignition sources and ensuring ventilation.

Flue Gas Warnings and Actions

Warnings and actions related to flue gases causing poisoning or burns.

Electrical Safety Precautions

Safety precautions for electrical work, including power disconnection.

Technical Data

Technical Data - General

Specifications like gas category, dimensions, efficiency, and temperatures.

Technical Data (Continued)

Technical Data – G20 Power/Load G20

Details on heat output and effective output range for G20 gas.

Technical Data – Heating

Data related to heating performance like flow temperature and water flow.

Technical Data - Electrics

Electrical specifications including voltage, fuse, and power consumption.

Product Description

Product Description (Continued)

Set-up

Set-up (Continued)

Air/Flue Pipe (Continued)

Wall-Mounting the Product

Installation

Installation (Continued)

Gas Connection

Steps for establishing a safe and compliant gas connection.

Connecting the Condensate Discharge Pipe

Instructions for connecting the condensate drain correctly.

Check Compliance with the Local Gas Group

Verifying the product is set for the correct local gas type for safety.

Flue Installation

Electrical Installation

Notes on electrical installation by qualified electricians for safety.

Carrying Out the Wiring

Instructions for performing the electrical wiring safely and correctly.

Electrical Installation (Continued)

Establishing the Power Supply

Steps to establish the main power supply connection to the boiler.

Start-up

Carrying Out the Initial Start-up

Guidance on performing the initial start-up procedure correctly.

Checking and Treating the Heating Water

Procedures for checking and treating heating water quality.

Start-up (Continued)

Checking the Gas Setting

Procedures for checking and adjusting gas settings for optimal performance.

Checking the Gas Setting (Continued)

Thoroughly Flushing the Heating Installation ("Hot")

Checking Leak-Tightness

Handing Over to the End User

Inspection and Maintenance

Inspection and Maintenance (Continued)

Troubleshooting (Continued)

Appendix A Inspection and Maintenance Work

Appendix B Overview of Diagnostics Codes

Appendix D Overview of Fault Codes

Appendix E Wiring Diagram

Appendix F Wiring Diagram, 30 kW

Appendix H Commissioning Flow Chart

Related product manuals