Need help?Do you have a question about the Vaillant ecoFIT sustain Series and is the answer not in the manual?
General| Model | ecoFIT sustain Series |
|---|---|
| Category | Boiler |
| Fuel Type | Natural Gas |
| Efficiency Rating | A |
| Mounting | Wall-mounted |
| ErP Rating | A |
| Type | Combi |
| Central Heating Output (kW) | 4.7-32 |
| Domestic Hot Water Flow Rate (l/min) | 12.3 l/min (830) |
| Warranty | 2 years |
Defines the product's intended purpose and prohibited uses.
Specifies required qualifications for personnel performing work.
Conveys important safety information to prevent risks.
Safety precautions related to gas detection and handling.
Safety precautions regarding flue gas exposure and prevention.
Safety precautions for electrical work on the product.
Warnings on weight, temperature, and heating water quality.
Precautions for frost, safety devices, and regulations.
Requirement to observe national regulations and standards.
Contact details for sales, technical, general, training, and spares support.
Information on registering the appliance for guarantee validation.
General technical specifications of the boiler models.
Technical data related to heating and hot water functions.
Electrical specifications for the boiler.
Explains CE marking and details on the identification plate.
Identifies components and describes safety features.
Checks for delivery contents and provides product dimensions.
Guidelines for installation location and required clearances.
Information on air/flue pipe types and installation.
Details on flue terminal placement and system types.
Steps for wall mounting, using templates, and casing removal/installation.
Steps before installation, including water quality checks.
Instructions for connecting gas and water supply lines.
Procedures for connecting the condensate discharge pipe.
Explains operation, installer level, and status codes.
Procedures for setting DHW temp and using diagnostic programmes.
Procedures for initial start-up and treating system water.
Steps for filling, purging, gas settings, and flow rate checks.
Procedures for flushing the heating system with cold and hot water.
Adjusting burner anti-cycling, pump output, and bypass valve.
Adjusting the domestic hot water temperature.
Steps for final handover, including safety explanations and documentation.
Guidance on completing service records and adhering to intervals.
Procedures for checking/cleaning burner, heat exchanger, and ignition electrode.
Steps for cleaning the condensate trap and heating filter.
Procedures for draining the product and checking expansion vessel pressure.
Identifying faults, accessing memory, and resetting parameters.
Guides for replacing burner, heat exchanger, pump, and sensors.
Steps for replacing the main PCB and user interface PCB.
Procedure to check the product for leaks.
Procedures for safely decommissioning the boiler.
Instructions for proper disposal of the product and packaging.
Table detailing inspection tasks and recommended intervals.
Explains diagnostic, status, and fault codes for the product.
Electrical wiring diagrams for the combi boiler.
Form for recording commissioning and warranty validation details.
A flowchart guiding the commissioning process.
To Next Page