EasyManua.ls Logo

Vaillant eloBLOCK VE 28 /14 EU I User Manual

Vaillant eloBLOCK VE 28 /14 EU I
32 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Installation and maintenance instructions
eloBLOCK
VE .. /14 EU I
FI (fi)
Publisher/manufacturer
Vaillant GmbH
Berghauser Str. 40 D-42859 Remscheid
Tel. +492191180 Fax +492191182810
info@vaillant.de www.vaillant.de

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Vaillant eloBLOCK VE 28 /14 EU I and is the answer not in the manual?

Vaillant eloBLOCK VE 28 /14 EU I Specifications

General IconGeneral
TypeElectric boiler
Power Output28 kW
Dimensions (HxWxD)740 x 410 x 310 mm
Energy Efficiency ClassA
Nominal Voltage230 V
Warranty2 years
Fuel TypeElectricity

Summary

1 Safety

1.1 Action-Related Warnings

Classifies danger levels using warning signs and signal words.

1.2 Improper Operation Dangers

Details risks of injury and damage from incorrect product operation.

1.4 General Safety Information

Covers risks like inadequate qualifications, lack of safety devices, electric shock, burns, and corrosion.

3 Product Description

4 Set-up

4.5 Wall Mounting Instructions

Provides instructions and conditions for securely mounting the product on a wall.

4.3 Minimum Clearances

Shows diagram and values for required installation clearances around the product.

4.4 Installation Site Requirements

Lists criteria for selecting a suitable indoor installation location.

5 Installation

5.1 Connecting Heating Flow & Return

Guides on connecting the heating flow and return lines according to standards.

5.3 Electrical Installation

Details safety precautions and requirements for electrical connections.

6 Start-up

6.1 Checking and Treating Heating Water

Covers checking water quality and necessary treatment before filling the system.

6.2 Checking Filling Pressure

Details how to read and ensure correct filling pressure in the heating installation.

6.3 Filling and Purging Heating Installation

Step-by-step guide for filling and removing air from the heating installation.

6.4 Function and Leak-tightness Check

Guides on final checks after start-up to ensure proper operation and no leaks.

7 Adapting to Heating Installation

8 Handover to End User

9 Troubleshooting

9.1 Eliminating Faults

Guidance on identifying and resolving fault codes displayed by the product.

10 Inspection and Maintenance

10.6 Replacing the Heating Rods

Instructions for replacing the heating rods in the heat exchanger.

10.11 Replacing Expansion Vessel

Detailed instructions for removing and installing a new expansion vessel.

10.4 Replacing the Pump

Detailed instructions for removing and installing a new pump.

10.12 Replacing PCB and Display

Guides on replacing the printed circuit board and display unit.

10.5 Replacing the Heat Exchanger

Step-by-step guide for removing and replacing the heat exchanger.

10.13 Completing Inspection and Maintenance

Final steps to reassemble and verify the product after maintenance.

11 Decommissioning

A Status Codes Overview

B Diagnostics Codes Overview

C Fault Codes Overview

C.1 Fault Code Meanings and Remedies

Lists fault codes, their meanings, and recommended remedies.

C.2 Fault Code Details

Provides further details on fault codes related to sensors, relays, and frozen components.

D Pump Status LED

F Wiring Diagrams

G Inspection and Maintenance Overview

H Heat Curves

L Technical Data

Related product manuals