Need help?Do you have a question about the Vaillant eloBLOCK VE 14 EU I Series and is the answer not in the manual?
Classification and symbols for danger warnings.
Risks and precautions against incorrect product usage.
Defines the specific application of the product as a heat generator.
Broad safety advice including qualifications and specific risks.
Requirement to observe national and international regulations.
Instruction to follow related system component documentation.
Guidance on passing documents to the end user.
Specifies which product article numbers the instructions apply to.
Overview of the product's physical components and layout.
Identification and description of key functional parts of the product.
Explains how the product operates in domestic hot water heating systems.
Details the automatic control of the pump's differential pressure target value.
Explains the meaning of information found on the product's data plate.
Indicates compliance with EU directives based on the data plate.
Locates the product's unique serial number on the identification plate.
Steps to verify all included parts are present and undamaged.
Provides the physical dimensions of the product.
Specifies the required space around the product for installation and ventilation.
Lists conditions and restrictions for choosing a suitable installation location.
Instructions and considerations for securely mounting the product on a wall.
Step-by-step guide for safely removing and refitting the front cover.
Procedures for accessing and replacing the side casing of the product.
Details on connecting the primary heating water pipes to the unit.
Instructions for connecting the safety valve's drain line.
Covers all aspects of connecting the product to the electrical supply.
Procedures for ensuring heating water quality and proper system filling.
How to verify and adjust the system's water pressure.
Steps for filling the system with water and removing air.
Final checks to ensure the product and system are functioning and sealed.
General guidance on identifying and resolving fault codes displayed by the product.
Specific steps to resolve issues related to the product's internal pump.
Procedure for addressing faults arising from a jammed relay.
Guidance on obtaining original and approved replacement parts.
Essential steps before commencing any maintenance work on the product.
Procedures for safely emptying water from the product and system.
Step-by-step instructions for replacing the internal circulation pump.
Guide for removing and installing the product's main heat exchanger.
Detailed steps for replacing the heating elements within the product.
Instructions for removing and installing the safety relief valve.
Guide for replacing the component that monitors system pressure.
Procedures for replacing the temperature sensing component.
Steps for replacing the over-temperature safety device.
Instructions for removing and installing the system's expansion vessel.
Guide for replacing the main control board and user interface display.
Final steps to reassemble and verify the product after maintenance.
Lists and explains the status codes displayed by the product.
Detailed table of diagnostic codes for product configuration and troubleshooting.
Electrical schematic for specific product models.
Electrical schematic for specific product models.
Electrical schematic for specific product models.
General specifications including dimensions, pressure, and weight.
Heating-related performance specifications and settings.
Electrical specifications including connection, output, and current ratings.
To Next Page
General