Why are there noises after replacing the fan in my Vaillant recoVAIR VAR 360/4?
If you're hearing noises after replacing the fan, it's possible that the fan was installed incorrectly. Check the fan's installation location to ensure it's properly placed.
What to do if there is a failure of the frost protection element in my Vaillant recoVAIR VAR 360/4?
If there is a failure of the frost protection element, it could be that the frost protection element is defective. Replace the frost protection element.
What to do if there is no connection to the step switch on my Vaillant recoVAIR VAR 360/4 Boiler?
If there is no connection to the step switch, it may be that the 4-step switch does not work or is defective. Activate the 4-step switch in the installer level and check that the 4-step switch works correctly.
What to do if there is a failure or fault with the air quality sensor on my Vaillant recoVAIR VAR 360/4 Boiler?
General| Airflow | Up to 360 m³/h |
|---|---|
| Model | recoVAIR VAR 360/4 |
| Filter | G4 and F7 filters |
| Installation | Wall-mounted |
| Frost protection | Automatic |
| Product Type | Central Ventilation Unit |
Covers navigation, control elements, and the main status screen.
Instructions for powering the unit on and off using the mains connection.
Procedures for adjusting ventilation levels via different control methods.
How to adjust the temperature setting for the room.
Guides on identifying and resolving product faults and error messages.
Provides instructions and safety guidelines for performing maintenance tasks.
Details the process of cleaning, checking, and replacing air filters.
Lists maintenance-related messages and their corresponding work and intervals.
Provides a guide to identifying symptoms and their possible causes.
Offers solutions and corrective actions for specific fault messages.
To Next Page
