27VRT 230 Installation Manual
You can select and change the following
parameters:
Display Set by turning the dial
Set-back temperature
Default setting: 15 °C
Adjustment range:
5 ... 30 °C
Correction of actual room
temperature
Adjustment of the displayed
value by up to +/- 3 °C
Default setting: 0 °C
Display Set by turning the dial
Control characteristics/
route adjustment
For optimum adaptation to
the room size or radiator
configuration
Default setting: 0
Adjustment range: -5 ... +5
(Positive values: room
thermostat switches more
slowly; negative values:
room thermostat switches
more quickly)
Day setting
For activation of the cal-
endar
Start-up 11
To Next Page
Loading...
