EasyManua.ls Logo

Vaillant VRT 392f - User Manual

Vaillant VRT 392f
36 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
VRT 392
For the operator / for the expert technician
Operating and Installation Manual
VRT 392f
Room thermostat with radio transmission
VRT 392f
GB

Table of Contents

Other manuals for Vaillant VRT 392f

Question and Answer IconNeed help?

Do you have a question about the Vaillant VRT 392f and is the answer not in the manual?

Summary

Equipment Properties

Application of VRT 392 f

Details the VRT 392f as a programmable room temperature controller for heating and hot water generation.

VRT 392 f Product Specifications

Lists key features like eBUS interface, wireless communication, graphical display, and dial operation.

Documentation Notes

Document Storage Guidelines

Instructions for storing the operating manual and related documents for future availability.

Understanding Safety Symbols

Explains the meaning of danger, caution, and note symbols used throughout the manual for safety and information.

Instruction Validity

Specifies that instructions apply to specific part numbers obtained from the expert technician.

CE Compliance Label

Confirms the VRT 392f meets fundamental requirements of relevant directives for compliance.

Safety Precautions

Hot Water Scalding Hazard

Warns about scalding risks from hot water, especially for children and elderly, advising temperature selection.

Anti-Legionella Function Scalding Risk

Warns about potential scalding from anti-legionella function and advises consulting technician for details.

Operating Instructions

Intended Use of VRT 392 f

Defines the VRT 392f's purpose and permissible uses with accessories, warning against misuse.

Ambient Conditions for Installation

Specifies installation requirements for dry rooms and proper air circulation around the controller.

Care and Cleaning Procedures

Provides instructions on cleaning the VRT 392f using a damp cloth, avoiding abrasive agents.

Warranty and Service Information

Outlines warranty conditions requiring qualified installation and provides service contact information.

Recycling and Disposal Instructions

Instructs on proper disposal of appliance, packaging, and batteries, emphasizing environmental responsibility.

VRT 392 f Operation

Operating and Display Front Overview

Introduces the VRT 392f's front panel controls and display elements for user interaction.

Display Screens Overview

Describes different screen types and their areas: basic data, parameters, and explanations for user information.

Operating Concept: Turn and Click

Explains the 'Turn and Click' principle of the dials for navigation and parameter adjustment.

Navigating Through VRT 392 f Screens

Details how to page through different screens using the left-hand dial for access to functions.

Changing Parameters on VRT 392 f

Explains how to use the right-hand dial to scroll through and select parameters within a screen.

Default Display Operations

Describes changing operating mode and room temperature directly from the default display for quick access.

Adjusting Target Room Temperature

Guides users on how to adjust the desired room temperature using the right-hand dial.

Operator vs. Expert Technician Levels

Differentiates between operator and expert technician access levels for settings and parameter adjustments.

Operator Level Screen Access

Lists the available screens for operator-level adjustments and how to access them.

Editing Screens: Practical Examples

Provides practical examples of editing time programmes, holiday periods, and heating settings.

Setting Heating Time Programmes

Details setting time windows and comfort temperatures for heating circuits for efficient scheduling.

Programming Holiday Periods

Explains setting a lower room temperature for extended periods away from home to save energy.

Heating Settings Configuration

Describes entering the set-back temperature for control outside programmed time windows.

Hot Water Parameter Entry

Guides setting the target temperature for hot water generation via the VRT 392f.

Renaming System Components

Shows how to rename system components like heating circuits or hot water baths for customization.

Status and Error Messages

Status Messages Overview

Explains status indicators like 'Holiday', 'Service + telephone number', and 'Dashes (--)' display.

Error Message Explanations

Lists and explains error messages like 'Error boiler', 'Com. Error boiler', and 'No radio communication'.

Battery Replacement Procedure

Provides instructions for replacing the controller's batteries when they are low.

Radio Receiver Unit Status and Faults

Describes the meaning of LED indicators (green, red) on the radio receiver unit for system status.

Installation Instructions

Documentation Notes for Installation

Notes for the installation manual, including other applicable documents and symbols used.

Description of the VRT 392 f Device

Overview of the VRT 392f, its components, power supply, and communication methods for installation.

Safety Instructions and Regulations for Installation

Details critical safety, electrical, and general regulations for safe appliance installation.

Assembly and Installation Steps

Covers scope of delivery, accessories, installation location, and mounting of receiver and control.

Electrical Installation Details

Details the electrical connection for the wall-mounted wireless receiver unit and appliance.

Initial Commissioning Process

Guides through first-time setup, language selection, system configuration, and expert technician level.

Factory Service and Warranty Information

Information on Vaillant service, warranty conditions, and contact details for support.

Recycling and Disposal for Installation

Instructions for recycling the appliance, packaging, and batteries according to regulations.

Technical Data Overview

Provides detailed technical specifications for the VRT 392f and its radio receiver unit.

Summary

Equipment Properties

Application of VRT 392 f

Details the VRT 392f as a programmable room temperature controller for heating and hot water generation.

VRT 392 f Product Specifications

Lists key features like eBUS interface, wireless communication, graphical display, and dial operation.

Documentation Notes

Document Storage Guidelines

Instructions for storing the operating manual and related documents for future availability.

Understanding Safety Symbols

Explains the meaning of danger, caution, and note symbols used throughout the manual for safety and information.

Instruction Validity

Specifies that instructions apply to specific part numbers obtained from the expert technician.

CE Compliance Label

Confirms the VRT 392f meets fundamental requirements of relevant directives for compliance.

Safety Precautions

Hot Water Scalding Hazard

Warns about scalding risks from hot water, especially for children and elderly, advising temperature selection.

Anti-Legionella Function Scalding Risk

Warns about potential scalding from anti-legionella function and advises consulting technician for details.

Operating Instructions

Intended Use of VRT 392 f

Defines the VRT 392f's purpose and permissible uses with accessories, warning against misuse.

Ambient Conditions for Installation

Specifies installation requirements for dry rooms and proper air circulation around the controller.

Care and Cleaning Procedures

Provides instructions on cleaning the VRT 392f using a damp cloth, avoiding abrasive agents.

Warranty and Service Information

Outlines warranty conditions requiring qualified installation and provides service contact information.

Recycling and Disposal Instructions

Instructs on proper disposal of appliance, packaging, and batteries, emphasizing environmental responsibility.

VRT 392 f Operation

Operating and Display Front Overview

Introduces the VRT 392f's front panel controls and display elements for user interaction.

Display Screens Overview

Describes different screen types and their areas: basic data, parameters, and explanations for user information.

Operating Concept: Turn and Click

Explains the 'Turn and Click' principle of the dials for navigation and parameter adjustment.

Navigating Through VRT 392 f Screens

Details how to page through different screens using the left-hand dial for access to functions.

Changing Parameters on VRT 392 f

Explains how to use the right-hand dial to scroll through and select parameters within a screen.

Default Display Operations

Describes changing operating mode and room temperature directly from the default display for quick access.

Adjusting Target Room Temperature

Guides users on how to adjust the desired room temperature using the right-hand dial.

Operator vs. Expert Technician Levels

Differentiates between operator and expert technician access levels for settings and parameter adjustments.

Operator Level Screen Access

Lists the available screens for operator-level adjustments and how to access them.

Editing Screens: Practical Examples

Provides practical examples of editing time programmes, holiday periods, and heating settings.

Setting Heating Time Programmes

Details setting time windows and comfort temperatures for heating circuits for efficient scheduling.

Programming Holiday Periods

Explains setting a lower room temperature for extended periods away from home to save energy.

Heating Settings Configuration

Describes entering the set-back temperature for control outside programmed time windows.

Hot Water Parameter Entry

Guides setting the target temperature for hot water generation via the VRT 392f.

Renaming System Components

Shows how to rename system components like heating circuits or hot water baths for customization.

Status and Error Messages

Status Messages Overview

Explains status indicators like 'Holiday', 'Service + telephone number', and 'Dashes (--)' display.

Error Message Explanations

Lists and explains error messages like 'Error boiler', 'Com. Error boiler', and 'No radio communication'.

Battery Replacement Procedure

Provides instructions for replacing the controller's batteries when they are low.

Radio Receiver Unit Status and Faults

Describes the meaning of LED indicators (green, red) on the radio receiver unit for system status.

Installation Instructions

Documentation Notes for Installation

Notes for the installation manual, including other applicable documents and symbols used.

Description of the VRT 392 f Device

Overview of the VRT 392f, its components, power supply, and communication methods for installation.

Safety Instructions and Regulations for Installation

Details critical safety, electrical, and general regulations for safe appliance installation.

Assembly and Installation Steps

Covers scope of delivery, accessories, installation location, and mounting of receiver and control.

Electrical Installation Details

Details the electrical connection for the wall-mounted wireless receiver unit and appliance.

Initial Commissioning Process

Guides through first-time setup, language selection, system configuration, and expert technician level.

Factory Service and Warranty Information

Information on Vaillant service, warranty conditions, and contact details for support.

Recycling and Disposal for Installation

Instructions for recycling the appliance, packaging, and batteries according to regulations.

Technical Data Overview

Provides detailed technical specifications for the VRT 392f and its radio receiver unit.

Vaillant VRT 392f Specifications

General IconGeneral
DisplayLCD
Temperature Range5°C to 30°C
Programming7-day programmable
TypeProgrammable Thermostat
CompatibilityVaillant heating systems
Power Supply2x AA batteries
Wireless RangeUp to 30 meters
ControlWireless

Related product manuals