Need help?Do you have a question about the Vaillant VWZ MEH 97/6 and is the answer not in the manual?
General| Category | Heat Pump |
|---|---|
| Heating Capacity | 9.7 kW |
| Cooling Capacity | 6.0 kW |
| Refrigerant | R410A |
| Product name | VWZ MEH 97/6 |
| Power Supply | 230 V, 50 Hz |
Defines intended use, general safety, and risks from improper operation or changes.
Classifies warnings and defines product intended use and limitations.
Addresses risks from lack of safety devices, hot components, and condensate damage.
Highlights risks from improper operation, unauthorized changes, and incorrect maintenance.
Covers general safety, risks from unqualified work, and electric shock precautions.
Illustrates heat pump system and details safety devices like frost protection.
Presents product overview, design, hydraulic block, and underside views.
Details the control panel symbols, indicators, and button functions.
Covers type designation, CE marking, and essential safety devices.
Guides through product startup, isolator devices, and initial settings.
Explains reading and identifying fault messages and their priority.
Advises on contacting service and reading/interpreting fault codes.
Directs users to tables for fault detection and elimination procedures.
Provides a table of problems, possible causes, and recommended remedies.
Lists and explains various status codes displayed by the product.
Continues the explanation of status codes for product operation.
Lists fault codes, their causes, and recommended remedies.
Continues listing fault codes, their causes, and recommended remedies.
Continues listing fault codes, their causes, and recommended remedies.
Continues listing fault codes, their causes, and recommended remedies.
Continues listing fault codes, their causes, and recommended remedies.
Covers criteria for installation site selection and product dimensions.
Lists preparatory steps and components for hydraulics installation.
Covers preparation, safety, mains voltage quality, and electrical partitions.
Guides on setting the diverter valve and checking heating water quality.
Details the process for filling and purging the heating installation.
Covers product startup, installation assistants, and menu functions without system control.
Guides on configuring the heating installation and instructing the end user.
To Next Page