Probe support accessory
Probe support accessory is included when the data logger is purchased with a GMP251 CO
2
measurement probe. In addition to providing a versatile attachment for GMP251, the included
probe support has attachments for a Ø 12 mm probe and the sensor tip of the TMP115 probe. It
also provides sucient separation between the probes to prevent the mild heating eect of
the GMP251 from aecting the measurement of the other probe. For this reason, it is best not
to attach the GMP251 to a second probe using a cable tie, for example.
Figure 5 Probe support accessory mounting options
A
Mounting through a hole using the screw-on attachment part
B Mounting using reusable fastener strips
C Mounting with screws and wall plugs
15
ENGLISH
To Next Page
Loading...
