Vaisala RFL100 - Mounting RFL100

1
2
3
4
5
6
7
8
Figure 13 Rear and inside
1 Type label
2 On/o switch
3 Clock battery
4 Probe orientation mark. When
connecting the probe, line up the
markings on the probe and above the
connector before pushing the probe to
the connector.
5 Humidity and/or temperature sensors
under the filter
6 Release button. Push to release
RFL100 from its current viewLinc
system, and allow it to connect to any
viewLinc system.
7 Main batteries. Use only non-
rechargeable, AA size, 1.5 V alkaline
(LR6) or lithium (FR6) batteries.
8 Battery cover
1
2
5
4
3
2
Figure 14 Mounting bracket
1 6 mm (0.23 inch) hole for hook
mounting
2 Holes for mounting with cable ties
3 Strong magnet (in magnetic mounting
bracket only). Handle with care.
4 Suitable area for attaching labels
5 3.80 mm (0.15 inch) holes for screw
mounting
22 M211822EN-G