EasyManua.ls Logo

Val Therm B - Thermal Protection

Default Icon
13 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Component List
10- BRAKER
P
rotects the control circuit against electric overloads.
(600 volts and 208 volts Water-heater only)
11-GROUND BOX
Make sure that the ground box is in the ground to prevent any electrocution.
12-THERMAL PROBE
When water is inferior of the temperature assign, it allows the activation of
the elements though the thermostat.
13-HEATING ELEMENT
Triple phased 600 volts element, with a power 6 or 9 kw.
14- HEATING ELEMENT
Single phased 240 volt element, with 3kw power.
1
5-OPENING
1½`` diameter opening allowing the passage of alimentation cables.
16-THERMAL PROTECTION
High temperature circuit breaker with automatic reengagement.
17-TERMAL PROTECTION
High temperature circuit breaker with manual reengagement.
18-PRESSURE SWITCH
A cut-off switch when water is low.