23 EN
Using the appliance
B
WATER HARDNESS
Water softner
level
Regeneration
occurs every
X program
sequence
1)
Salt
consumption
(gram/cycle)
German
dH
French
fH
British
Clarke
Mmol/l
0 - 5 0 - 9 0 - 6 0 - 0,94
H1
No
regeneration
0
6 - 11 10 - 20 7 - 14 1,0 - 2,0
H2
10 9
12 - 17 21 - 30 15 - 21 2,1 - 3,0
H3
5 12
18 - 22 31 - 40 22 - 28 3,1 - 4,0
H4
3 20
23 - 34 41 - 60 29 - 42 4,1 - 6,0
H5
2 30
35 - 55 61 - 98 43 - 69 6,1 - 9,8
H6
1 60
1°dH=1.25°Clarke=1.78
°fH=0.178mmol/l
The factory setting: H3
1) Every cycle with a regeneration operation consumes additional 2.0 litres of water, the
energy consumption increases by 0.02 kWh and the program extents by 4 minutes.
NOTE
If your model does not have any water softener, you may
skip this section: Water Softener
The hardness of the water varies from place to place. If hard water is used in the dishwasher,
deposits will form on the dishes and utensils. The appliance is equipped with a special
from the water.
PREPARING AND LOADING DISHES
•
• For particular items, select a program with the lowest possible temperature.
•
To prevent damage, do not take glass and cutlery out of the dishwasher immediately
after the program has ended.
To Next Page
Loading...
Need help?
General
