43 EN
Useful information
C
Error codes
If there is a malfunction the dishwasher will display an error code. The following table shows
possible error codes and their causes.
Codes Meanings Possible causes
E1 Longer inlet time.
Faucets is not opened, or water
intake is restricted,or water
pressure is too low.
E3
Not reaching required
temperature.
Malfunction of heating element.
E4 Some element of dishwasher leaks.
Ed
Failure of communication
between main circuit board with
display circuit board.
Open circuit or break wiring for the
communication.
WARNING
If overflow occurs, turn off the main water supply before
calling a service.
If there is water in the base pan because of an overfill or
small leak, the water should be removed before restarting
the dishwasher.
If there is an error code that cannot be solved, please
request professional assistance.
Usage Counter
When the power cord is connected, but the dishwasher is not turned on, press and hold the
Delay button for 5 seconds. The dishwasher display will show the usage count.
Example:
632: Show “000” for two seconds, then show “632” for two seconds, at last it will be off.
9080: Show “009” for two seconds, then show “080” for two seconds, at last it will be off.
To Next Page
Loading...
Need help?
General
