32
4. Close the door, press the Power button.
5. Choose a program, the response light will turn on. Then press the Start/Pause button,
the dishwasher will start its cycle.
CHANGING THE PROGRAM MID-CYCLE
A program can only be changed if it has been running only for a short period of time,
otherwise the detergent may have already been released or the wash water with detergent
has already been drained. If this is the case, the dishwasher needs to be reset and the
1. Press the Start/Pause button to pause the washing.
2.
Press Program button“<”or“>” more than three seconds the machine will be in program
selection mode
3. You can change the program to the desired cycle setting.
FORGET TO ADD A DISH?
A forgotten dish can be added any time before the detergent dispenser opens. If this is the
case, follow the instructions below:
1. Press the Start/Pause button to pause the washing.
2. Wait 5 seconds then open the door.
3. Add the forgotten dishes.
4. Close the door.
5. Press the Start/Pause button , the dishwasher will start after 10 seconds.
After 5 sec.
To Next Page
Loading...
Need help?
General
