28
EN
Using the appliance
B
NOTE
Do not open the door until the programme has nished.
At at the end of the washing programme, you can leave the door of your
appliance ajar to speed up the drying process.
If the appliance door is opened or the power is cut off during the wash, the
programme will continue when the door is closed or the power is restored.
Alarm check (depending on the model)
To change the alarm sound level, proceed as follows:
1.
Open the door and press the Option (6) and Select (7) buttons simultaneously for 3
seconds.
2. When the sound setting is recognised, the alarm lets out a long tone and the unit dis-
plays the last set level from "S0" to "S3".
3.
To decrease the sound level, press the Select button (7). To increase the sound level,
press the Options (6) button.
4. To save the selected sound level, turn off the appliance.
The S0 level means that all sounds are disabled. The factory setting is S3.
Energy saving mode
To activate or deactivate the power saving mode, follow these steps:
1. Open the door and press the Programme (2) and Option (6) buttons simultaneously for
3 seconds.
2. After 3 seconds, the unit displays the last setting, "IL1" or "IL0".
3.
When the power save mode is activated, "IL1" is displayed. In this mode, the interior
light (if available) is switched off 2 minutes after the door is opened, and the unit is
switched off after 15 minutes of inactivity to save energy.
4.
When the power save mode is disabled "IL0" is displayed. If the energy saving mode
is disabled, the interior lights will be on as long as the door is open, and the appliance
will always be on unless it is switched off by the user.
5. To save the selected setting, turn off the appliance.
In factory setting, the power save mode is activated.
To Next Page
Loading...
Need help?
General
