VALBERG 972691 - Wash Cycle Table

24 25
EN EN
Using the appliance Using the appliance
B B
Filling the detergent dispenser
1. Press the release latch on the detergent dispenser to open the cover.
Push latch to open
2. Add detergent into the larger cavity
A
for main wash. For more heavily soiled wash loads,
also add some detergent into the smaller cavity
B
for release during pre-wash.
A
B
3. Close the cover and press on it until it locks into place.
NOTE
Please observe the manufacturer’s recommendations on
the detergent packaging.
Wash cycle table
• The table below shows which programs are best for the levels of food residue on them and
how much detergent is needed. It also show various information about the programs.
• Consumption values and program duration are only indicative except for ECO program.
( ) indicates that the program uses rinse aid in the last rinse.
Program
Description of
cycle
Detergent
pre/main
wash
Running
time(min)
Energy
(kWh)
Water
(L)
Rinse
aid
Intensive
Pre-wash (50 °C)
Wash (70 °C)
Rinse
Rinse
Rinse (70 °C)
Drying
4/10g
1 tab
140 1.200 9.6
Universal
Pre-wash
Wash (60°C)
Rinse
Rinse (70°C)
Drying
4/10g
1 tab
120 1.050 7.7
(*EN60436)
Pre-wash
Wash (45°C)
Rinse (65°C)
Drying
4/10g
1 tab
230 0.613 6.5
Glass
Wash (45°C)
Rinse
Rinse (60°C)
Drying
14g
1 tab
75 0.650 5.8
90 min
Wash (65°C)
Rinse
Rinse
Rinse (70°C)
Drying
14g
1 tab
90 1.100 6.6
Rapid
Wash(40°C)
Rinse
Rinse
12g
1 tab
30 0.500 5.8
Eco
90
’