EasyManua.ls Logo

VALBERG 978217 - Error codes

VALBERG 978217
227 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
48
EN
Useful information
C
Troubleshooting tips
Before calling for service
Reviewing the charts on the following pages may save you from calling for service
Problem Possible causes What to do
Dishwasher doesn’t start
Fuse blown, or the circuit
break tripped.
• Replace fuse or reset
circuit breaker.
• Remove any other
appliances sharing the
same circuit with the
dishwasher.
Power supply is not turned
on.
• Make sure the dishwasher
is turned on and the door is
closed securely.
• Make sure the power cord
is properly plugged into the
wall socket.
Water pressure is low
• Check that the water
supply is connected
properly and the water is
turned on.
Door of dishwasher not
properly closed.
• Make sure to close the
door properly and latch it.
Water not pumped from
dishwasher
Twisted or trapped drain
hose.
• Check the drain hose.
Filter clogged. • Check the filter system.
Kitchen sink clogged.
• Check the kitchen sink
to make sure it is draining
well. If the problem is
the kitchen sink that is
not draining, you may
need a plumber rather
than a serviceman for
dishwashers.

Related product manuals