EasyManua.ls Logo

VALBERG CNF 327 E X742C - Electrical Connection and Door Reversibility

VALBERG CNF 327 E X742C
90 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
6
EN
Using the appliance
B
WARNING:
It must be possible to disconnect the appliance from the
mains power supply; the plug must therefore be easily
accessible after installation.
Electrical connection
Before plugging in, ensure that the voltage and frequency shown on the rating plate correspond
to your domestic power supply. Tha appliance must be earthed. The power supply cable plug
is provided with a contact for this purpose. If the domestic power supply socket is not earthed,
connect the appliance to a separate earth in compliance with current regulations, consulting a
qualified electrician. The manufacturer declines all responsibility if the above safety precautions
are not observed. This appliance complies with the E.E.C. Directives.
Door Reversibility
Before reversing the door, please be prepared below tools and material: straight screwdriver,
cross screwdriver, spanner and the components included in the poly bag:
Left Door Hinge Cover x 1
Left Aid-Closer on Upper
Door x 1
Left Aid-Closer on Lower
Door x 1

Related product manuals